Pay attention to work detailsImprove service quality

A. Overview.

Performance and features:

The Summary. Capability Performation and feature.

This machine is used for rewinding and slitting of reel white paper tape, yellow paper tape, kraft paper etc.

Single-axis rewinder is used for dableside tape.The rewinding Can be used for masking pepar kraft paper bouble sinde formt and PVC protective mem bcanes rewinding.

The machine is light in weight, small in volume and low in noise. Efficient energy saving, fast dynamic response, stable operation speed. The machine set is empty, the line is pressed.

The machine is light. Small. Voicecess.It is ffective and energy saving highly sensitive and has stable operation speed.

This machine adopts frequency conversion to regulate speed and fully integrated circuit control. Complete functions, good repeatability, stable speed. Reliable. Absolute action.

The machine USES freguently conversion, and contrded by full both circuit molectron. It is perfect and has goob repeatdbility. And stable speed. It is dependable without mistakes.

Magnetic powder tension control system is used to control the winding tension. Two - section electronic length, length calculation is accurate.

The strain of reeling unreding use air pressure.It has two-parts electrical countors with comect counting.

Main technical parameters.

The Main technigue parameter.

Dimensions: length * width * height (2600*1500*1300)

Outter Size: Length * width * height (2600 * 1500 * 1300)

Weight: about 1,200kg

Weight: 1200 kg

Power: 5.5 KW - 380 - v

Power: 5.5 kw - 380 - v.

External pressure: 5 kg/c ㎡.

The Outer connection air pressure: 5 kg / ㎡.

Reel tube: 3"

Reeling papertube: 3"

Effective winding width: 1600mm.

Reeling effective width: 1600 mm.

2. Schematic diagram of electrical principles (omitted).

Diagrammatic of electricity principle

3. Installation precautions:

Notice of instail ation

1. The operator should read the instruction carefully before operation

Read the mtrodaction carefully before operator operating.

2. Check whether the four-leg mounting of the rewinder is stable and the body has no grounding wire.

Check up the rewinder. S four feet is stable and the body of it is connected with a ground bubble.

3. The machine should be installed in a dry and ventilated place, and the distance between the surrounding objects should be greater than 2m

Installate it in airness and dryness,and keep from other things about Two meters.

4. Connect the safety grounding terminal of the paper tape machine with the grounding protection line reliably, and the joint must be tightened.

Connect safe related land teminal with Jiedi protective line,and the Joint must screw down.

5. This machine must have special person to be responsible for, special person to use.

The machine reqwire professor to see to. And professor use it.

Four. Panel function diagram

Face plate panel panel functional diagrammatic.

Reset speed display. (2) reset. Meter length count. Indicates winding tension. Tape tension indicator. Upper and lower front thimble

Mobile Speed, ipc, Length count, working direction of a recognized stroin.

Adjustment of winding tension. Remove the tension adjustment. E power switch. Attending to start. Running stop/inching. Speed adjustment.

She was the first person to come back to China. She was the first person to come back to China.

[13] scram.

[13] crash stop

Five. Action steps.

The Operation steps

1. Connect the inlet pipe to the air inlet port of the air filter of the rewinding machine and connect the input power.

Connect tntake-tube with the intake-tube of air fliter of the rewinder,then get throagh take up the power source.

2. Turn on the power switch on the control panel.

Start the mains switch of contral panel.

3. Set the length of rewinding as follows.

4.

The enactment methods are as The following.

A. Then press the "" key to move the cursor" "hold" key to set the first length.

The foundation SET once then appears AL mantras for the first parts of the body as ge wei fsashs, using "<" and "bearing" to SET the Length of AL egual to the first parts Length.

B. Once again, PS-2 welding occurs in the mode. The "" key can be used to move the cursor and set the second section length (the first section length must be less than the second section). Otherwise, it cannot be counted.

Pressing SET again, appeas SE behind the underbite, ge wei flashs, use "<" and "hold" to SET the length of the second part cnotice SE(SE is greater than or equal to AL),Contraily it cant Count.

The second section is the frequency converter deceleration section, generally the first section is less than the second section 1---2 meters. For example; The length of rewinding is 50 meters per roll. The first length is set to 48 meters, and the second length to 50 meters. Automatic reset after counting, you can press the reset key to count again.

The second par is The man who has lived a long life. The second par is The man who has lived a long life. The second par is The man who has lived a long life Meters. Pressing the reposition keg,count again.

5. Paper tape.

Direction of panched tape.

A. Overshoot: over-shoot: over-shoot: overshoot: overshoot: overshoot: over shoot: over shoot: over shoot: over shoot: over shoot: over shoot: over shoot: over shred: over cut:

(1) the main biennial reel; He is the most important person in the world. He is the most important person in the world.